Example - Sending Email

Our Simple Contact Form with Email

Here we have our usual simple contact form built using Form Reform with the addition of a Send Email handler in the pipeline.

This handler has the actual email sending enabled. Please only use it to send email to yourself. If we receive complaints of abuse of this test, we will have to disable it.

Check out the edit mode details below. 

Submit

The difference between this form and the getting started form is only in the submit processing. We have added a Send Email handler to the pipeline.

More details of configuring the Send Email handler can be found at Sending Email.

There is also a real consequence of any spammer using this form, so the spam detection has been dialed up to maximum with the addition of Anti Spammer Master.

Handler pipeline for: Submit


Handlers in the pipeline will be applied in sequence when a form is submitted.

Anti-Spammer Master

Block Form Reform Spam with Anti-Spammer Master. Anti-Spammer Master can be enabled to either fail silently or to provide an error message that can then be managed through the On Error handlder.
Check for spam using Anti-Spammer Master.

Spam Detect

Configure multiple spam detection strategies. Each spam detection strategy can be separately enabled to either fail silently or to provide an error message that can then be managed through the On Error handlder.
Check for spam using the core Anti-Spam service.
Check using the core Banned Words service. Use this with caution on multilingual sites. A banned word in one language could be perfectly acceptable in another language.
Check using the core IP Deny list. The IP Deny service maintains a dynamic blacklist and whitelist of IP addresses. If an IP address is not in the whitelist it is checked against the blacklist.
Check if the submission contains URLs. URL inputs are exempt from this check.
Check if the submission contains <html> tags. Rich Text inputs are exempt from this check.
Check if the submission contains <script> tags. This should normally be enabled.
Some blocks such as the Honeypot and Captcha also detect spam. Their detection response can be managed by the normal form validation error handling , or by direct integration with this Spam Detect handler.

Validate Input Fields

Validate form input fields. Validate the form input fields provided by each block in the form. Provides a list of errors as {{errors:list}} if validation fails.

On Success

Denotes success processing (no errors). On Error and On Success should always be used in together to denote processing for errors and processing for no errors. Either may be used first.

Save to Session

Save form submission to session data. Data extracted from form fields is saved to the visitor/user session data. This is transient data that lasts for the duration of the Concrete CMS session. The primary reason for saving to a session is to enable values to be recovered and inserted into the same or other forms.
A form can be saved to the name configured by the form blocks or to a different (alias) name. This can be convenient when you take advantage of the default name "form_reform" when adding a single form to a page, but would like a more specific name for the saved form data.
A form submission may optionally update an existing response by matching one or more criteria of the response.
When a user is completing multiple forms, to keep the data from growing, old submissions may be cleared.
Name
Form items may optionally be redacted from the data that is saved. For example, to remove a password from the saved data. Redacted items are listed by input_name.
Where suggestions are offered, these are only suggestions. Other input names/handles may exist in the form and may be entered.

Message

Create a form response message to be displayed to the user. Build boilerplate for a response message, fill the boilerplate with form and site parameters and select a level to emphasize the message display. All text fields can use {{place_holders}} to be filled with system or entered form values.
The level of a message will also affect the Hide/Do-not-render state of subsequent form controls
   

Comment

Insert a comment. Make a comment or note within the pipeline. This handler has no effect on pipeline processing.
The condition below is purely for demonstrating UTM tags. If you don't use UTM, you can ignore this condition.

Condition If

Check a condition and either proceed or move forwards to an alternative. The handlers ConditionIf, ConditionElseIf, ConditionElse and ConditionEnd manage a single level of conditional processing in form handling.
     
     
     
     

Message

Create a form response message to be displayed to the user. Build boilerplate for a response message, fill the boilerplate with form and site parameters and select a level to emphasize the message display. All text fields can use {{place_holders}} to be filled with system or entered form values.
The level of a message will also affect the Hide/Do-not-render state of subsequent form controls
   

Condition End

Denotes end of condition processing. The handlers ConditionIf, ConditionElseIf, ConditionElse and ConditionEnd manage a single level of conditional processing in form handling.

Comment

Insert a comment. Make a comment or note within the pipeline. This handler has no effect on pipeline processing.
The addition to our usual processing pipeline is to actually send the email. Only one copy of the email is sent and that is to the email address entered in the form. In the actual edit dialogue you can add more recipients to the list. The controls to do that are not shown below.

Send Email

Send an email. Build boilerplate for an email, fill the boilerplate with form and site parameters. Send it to a configurable location. All text fields can use {{place_holders}} to be filled with system or entered form values. An optional condition may be configured to control sending email.
     
     
     
     
     
Sender
email name
From
Reply To
Recipients
email name
Message
     
Attach Files
Attached files are sent with an email as data, not as a URL, hence do not need to remain on the web server once the email has been sent.
No filesets are available.
The list of file fID enables {{place_holders}} evaluating to an fID to be directly attached. For example, a file could be uploaded to quarantine and then attached to an email without running the ImportQuarantineFiles handler.
Email address validation - global setting
These global settings are common to all Send Email form handlers across all forms and pages. Changing a setting here will affect all uses of Send Email in forms.

On Error

Denotes error processing. On Error and On Success should always be used in together to denote processing for errors and processing for no errors. Either may be used first.

Message

Create a form response message to be displayed to the user. Build boilerplate for a response message, fill the boilerplate with form and site parameters and select a level to emphasize the message display. All text fields can use {{place_holders}} to be filled with system or entered form values.
The level of a message will also affect the Hide/Do-not-render state of subsequent form controls
   

Form Reform blocks used

Source Page / Stack Form Name Block Type Input Name
Example - Sending Email form_reform Email Input email
Example - Sending Email form_reform Text Input first_name
Example - Sending Email form_reform Text Input last_name
Example - Sending Email form_reform Select Input pronoun
Example - Sending Email form_reform Message Display
Example - Sending Email form_reform Radioset Input subject
Example - Sending Email form_reform Text Area Input message
Example - Sending Email form_reform Honeypot more
Example - Sending Email form_reform Captcha
Example - Sending Email form_reform Submit Button submit
Developer Analysis

Additional Pages

Reform the way you add new input controls

If you need a specialized template or a custom input element, you can design new templates  or new block types for form elements as you would any block type.

Blocks are easy for third party addition or extension. Block templates and are the first thing any Concrete CMS developer learns to code. They are one of the easiest things to code. The underlying mechanisms are well established and reliable.

Reform what you can do with form data

Form handlers are built about the same extensible plugin system as many of my other addons (Universal Content Puller, Omni Gallery, Extreme Clean ...).

The whole system is aimed at easy extension within Form Reform, by third party addons, by agencies and by site building developers.

Handlers can be easily added to do whatever you want with the form data.

Reform where you can save form data

Saving form data with Form Reform is simply a handler in the processing pipeline. You can save to multiple locations or just one location.

If you need to save data elsewhere, such as to a dedicated table, a table provided through another addon, to another database, send it to an API, forward it to another server, or anywhere you can imagine, you can adapt or develop a form handler to do so.

The complexity of the code depends on where you are saving or sending the data, but wrapping that into a form handler plugin for Form Reform is straight forward.

The Form Reform handler plugin system is designed for easy extension.

Form Reform

Reform the way forms are built. Build a form out of blocks. Take control of how form submissions are processed and how the submitted data is stored. Easy to extend. Easy to reconfigure. Tangible data. Easy to add your own integrations.

Form Reform Display

List and display form submissions from Form Reform.

Form Reform UTM

Not just Form Reform and not just UTM! Capture and hold incoming UTM (or other) tags and make the tag values available to Form Reform and/or Conditional Redirect as {{place_holders}}. You don't need Form Reform to use this.

Form Reform Dynamics

Form handlers for querying Microsoft Dynamics, forwarding and updating form data to Microsoft Dynamics.

Snapshot

A suite of advanced image capture and upload tools. Enhanced drag and drop file uploading. Make screengrabs from within Concrete CMS. Capture images directly from device webcams. Edit images before uploading.

Form Reform Attributes, Express and Users

Save submitted forms to Express objects and user attributes. Add and remove users from groups.

Form Reform Image Picker

Form Reform Image Picker provides an image picking input block for Form Reform. The Image Picker Input is preconfigured to connect to most Omni Gallery gallery and slider display widgets, the core gallery block, and thumbnail showing templates for the core page list block. Advanced settings allow the Image Picker Input to be configured to pick images from other galleries and sliders.

Form Reform Data Picker

Form Reform Data Picker provides data picking input blocks for Form Reform. The Table Picker Input is preconfigured to connect to Universal Content Puller table display widgets. Advanced settings allow the Table Picker Input to be configured to pick data from other HTML tables.

Form Reform Developer

A growing suite of resources to assist those developing blocks, handlers and more complex forms for Form Reform.

Learn with a simple form

While you may have plans to implement some much more complex forms using Form Reform, we strongly recommend you start with a simple form such as our contact form example in order to review the basic principles of using Form Reform before you move onto anything bigger.

  1. Start by submitting the form at Getting Started - Your First Form a few times, even making some deliberate mistakes.
  2. Watch our Getting Started with Form Reform video to see how the form is built.
  3. Read through the rest of Getting Started - Your First Form for more details of how this form is built.
  4. Create a test page on your site to build your own version of Getting Started - Your First Form and experiment.
  5. Develop your test page with some of the concepts introduced by our further examples and experiment with some of the other form inputs.